Activator- FiXativer - Hydrographics Printable Film

Main menu:

DP PrintXer© printing film and FiXativer© fixer of

Design Plus Hydrographics extend the possibilities of the hydrographics technology to include the printing of your own patters.

FiXativer© aims to fix the quality and saturate the colours of printed graphics.

FiXativer© should be sprayed on a printed pattern.

Coat the picture with the liquid evenly; however, do not soak it ... The best method is to spray it with the use of a spray gun.

The newly sprayed print pattern will need to dry at least 10 minutes.

With the DP PrintXer© film without FiXativer© (fixer) you will not get satisfactory results in the form of colour saturation and print quality. When the film is placed on water, it will be activated in an uncontrolled way without the use of an activator.

FiXativer© aims to fix the quality and saturate the colours of printed graphics.

FiXativer© - available in our e-store

Packed in containers: 1 liter; 0.5 liters; 0.25 liter and 0.1 liter

Specification:

1.) Spraying the FiXativer© on ready printied film

2.) Needs 5-15mins, which depends on the temperature and object size

3.) As a result of its application : great colors and sharp graphics .

4.) Perpetuates the film and ready printed graphics, after the location film on the water the film not dissolve. (watch video)

5.) Perfectly match with DesignPlus activator

6.) Keep away from child and careful storage

Avoid direct sunlight.